Control system for two wipers suited for high power motors. This system consists of the control switch and a relay box.
It replaces up to three standard switches and it’s suited for motors provided with parking switch. It works either with single speed motor and with double speed motor.
Three buttons in the switch allow to manage all the functions needed for windscreen cleaning: ON/OFF, timing and washing program.
It is user friendly and it can be easily installed in few minutes, no screws are needed.


  • 3 intermittent speed
  • one or two continuous speed
  • motor brake
  • washing program
  • dimmer input
  • Easy to install
  • Plug-in connector
  • Fast-on contacts for motor connections.

Power supply10V to 30V DC
Internal fuses12A PTC for each motor
Stand-by currentLess than 20 mA
ProtectionsPolarity inversion
Motors- output currentsSingle or double speed – each motor 12 Amps max.
Inputs2 parking switches (open in park position)
Dimmer (see par. Wires)
Outputs2 slow speed – L and R SLOW
2 high speed – L and R FAST (if 2 speed motors)
1 wash pump (positive pole)
Functions3 intermittent settings
2 continuous speeds, slow and high speed
Wash / wipe program
ConnectionsRelay box
2x 4 poles connector
3x female 6,3 mm fast-on
1x 8 poles connectors RJ45 (can bus network)

1x 4 poles Minifit conn.
1x 8 poles connectors RJ45 (can bus network)
CaseRelay box Grey ABS
Switch Black ABS
Working temperature-10 °C / +50 °C
Storage temperature-20 °C / +70 °C
WordPress Lightbox